- Overview
- Detailed Photos
- Product Parameters
- Installation Instructions
Basic Info.
Product Description
5GHz 12dBi AC900 TDMA PTP/PTMP Wireless bridge
Model: CPE12
CPE12 5GHz Gigabit Outdoor CPE is designed to PtP&P2MP solutions for video surveillance transmission and wireless broadband access. Adopts of 11ac wireless technology and gigabit ethernet Port design, the maximum throughput for ptp connection can be up to 450Mbps. PoE 802.3af/at, 12V 1A Passive PoE and 12V 1A DC power supply method supported make it flexible to deploy by engineers. It features with 12dBi dual polarization directional antenna to provide an efficient way to pick up and maintain a stable long range connection. 
- 5GHz 11AC 867Mbps
- 12dBi directional antenna
- Two Gigabit Ethernet Port
- IP65 waterproof enclosure
- Pre-configured & plug and play(kit)
- 6000V Lightning Protection
- 802.3af PoE/12V 1A DC/12V 1A Passive PoE supported
5+km transmission range
CPE12 adopts of internal power amplifier and 12dBi directional antenna to provide an efficient way to pick up and maintain a stable signal for a wireless network up to 5km.
Flexible power supply method enable it easy to deployment
CPE12 support PoE 802.3af/at, 12V 1A Passive PoE and 12V 1A DC power supply optional. It helps the engineer to deployment the device flexiblely.
TDMA proprietary protocol
TDMA (Time Division Multiple Access) proprietary protocol improve performance and capacity for wireless P2MP outdoor application scenarios. In outdoor environment, the CPE use highly directional antennas to connect to the Basestation from distances that can span several kilometers. the CPE can't sense each other, they become "hidden nodes" and cannot coordinate access to the wireless channel. Thus the Basestation experiences frequent collisions from stations transmitting simultaneously. As the network scales, these collisions build up exponentially, increasing latency and lowering throughput. With TDMA, it coordinate all the data transmission and allocates time to active clients to provide greater noise immunity performance when compared to the conventional 802.11 CSMA/CA (Carrier Sense Multiple Access / Collision Avoidance) protocol.
Auto-bridge technology enable it to easy setup
For single pack,iLinK auto-bridge technology, makes the CPE or basestation in factory default settings connect to each other automaticaly after the device is powered on. For the kit pack, the two CPESs inside are pre-configured at the factory, so plug and play is supported without manual pairing. It is very useful for the person who is not familiar with network knowledge, especially for CCTV surveillance transmission application.
Easy to Setup and Manage
CPE12 comes with a centralized management software that helps users easily to manage all the devices in the network from a single PC-CPE Controller.
Professional Outdoor Design
Equipped with IP65 waterproof enclouse and high quality hardware design, CPE12 can work in various weather conditions, such as sunshine, rainfall or extremely low/high temperature environment.
| Product Information | |
|---|---|
| Model | CPE12 |
| Dimensions | 193*109*61mm |
| Deployment | Pole/Wall Mount |
| Application Scenarios | PtP and PtMP wireless connection for Privated ISP access or CCTV Surveillance |
| Hardware Features | |
| Frequency Range | 5GHz |
| Compliant Standards | IEEE 802.11a/n/ac |
| Private TDMA Protocol | ipMAX |
| Maximum Wireless Rate | 867Mbps |
| Interfaces | 2*10/100/1000Mbps Port |
| Antennas Gain | 12dBi |
| Antenna Beamwidth | Horizontal 30° Vertical 30° Elevation 30° |
| Reset Button | 1 |
| Power Consumption | 6.5W |
| Waterproof Level | IP65 |
| LED indicator | Power, LAN1, LAN2, LAN3, LED1, LED2, LED3 |
| Power Method | PoE 802.3af/at 12V1A Passive PoE 12V 1A DC |
| Lightning Protection | 6000V |
| Passive PoE | Passive power over ethernet via PoE/LAN (+4, 5pins; -7, 8pins ) up to 60 meters Voltage range 9-24V DC |
| Receive sensitivity | 11a 6Mbps -90dBm±1.5dBm 11n MCS0 HT20 -70dBm±1.5dBm 11n MCS7 HT20 -70dBm±1.5dBm 11ac MCS9 HT80 -59dBm±1.5dBm |
| Software Features | |
| Operating mode | AP/Station/WISP/ Repeater/Router |
| Enable/Disable Wireless Radio | Support |
| SSID Hidden | Support |
| Wireless Client isolation | Support |
| SSID Isolation | Support |
| Channel Bandwidth | 20/40/80MHz |
| Client Limitation For SSID | Support |
| Wireless Access Control | Support |
| Weak Signal Client Limitation | Support |
| Transmission Power | Adjustable power by 1dBm |
| WMM Capable | Support |
| APSD Capable | Support |
| Wireless Security | WPA-PSK, WPA2-PSK, Mix WPA/WPA2-PSK |
| Transparent Bridge | Support |
| VLAN Tagging for SSID | Support |
| DHCP Server | Support |
| VPN Pass-Through | PPTP, L2TP |
| Remote Web access | Support |
| Schedule Reboot | Support |
| Page Timeout | Support |
| Ping Watchdog | Support |
| Dyndns | noip,dyndns ,org |
| Network Diagnoses | Ping, Traceroute, Signal Scan |
| Time&Date Setting | Support |
| Firmware upgrade | Support |
| Backup/Restore Configuration | Support |
| Username Managerment | Support |
| System Log | Support |
| Managed By Controller | PC Software -- CPE Controller |
| Others | |
| Operating Temperature | -30ºC ~ 60ºC |
| Storage Temperature | -40ºC ~ 70ºC |
| Operating Humidity | 10%~90% non-condensing |
| Storage Humidity | 10%~90% non-condensing |
| Default login IP | 192.168.2.1/192.168.2.2 |
| Default Login Username | admin |
| Default Login Password | admin |
| Certifications | FCC/CE/RoHS |
CPE12 5GHz Outdoor CPE is designed to PtP&P2MP solutions for video surveillance transmission and wireless broadband access
