- Overview
- Detailed Photos
- Product Description
Basic Info.
Model NO.
CPE890DH
WiFi Antenna Type
Built-in
Transmission Rate
11AC 5.8GHz 900Mbps
Voltage
24V or 48V Poe
Antenna Gain
18dBi
Color
White
Certification
ISO9001, RoHS, CE
Chipset
Qualcomm
Antenna
Internal Diractional
Transport Package
Gift Box
Specification
11ac 900Mbps data rate
Trademark
OEM ODM
Origin
China
HS Code
851762
Production Capacity
10000/Week
Packaging & Delivery
Package Size
25.00cm * 11.00cm * 11.00cm
Package Gross Weight
0.800kg
Product Description
CPE-890DH is an high power industrial 5G outdoor CPE with 10KM PTP/PTMP range. Comply with the next generation 802.11ac Wi-Fi standard, Qualcomm Chipset, combined 900Mbps high speed in 5.8G, equipped Gigabit WAN port, 3 times Ethernet data rate faster than 300Mbps model; It with LED display to show and configure CPE's operation mode, Channel, IP address and Signal Strength, simple to do the Point to Point connection by reset button, no need to access into GUI.
900Mbps Data Rate & Gigabit WAN/LAN Ports
CPE-890DH features 802.11ac Wi-Fi and 2*2 MIMO technology, 900Mbps wireless speed. Equipped with Gigabit Ethernet port ensures high speed internet access and more end users access.
5GHz frequency, more channels, lower latency, higher stability
CPE890DH with full frequency of 5020~6100MHz, more than 200 channels available, it avoid the frequency interference problem, full meet with data transmission in fast speed, low delay, high stability requirement in wireless security or data transmission.
10KM PTP/PTMP Distance
Designed in two line Power Amplifier on PCB board, the power can be 500mW high power, 18dBi MIMO high gain panel antenna, greatly increase the Wi-Fi range to 10KM distance, then supply the stable Wi-Fi signal for users.
LED Display
CPE-890DH with LED display to show AP/Client operation mode, Channels, IP address and RF Power; What's more, it is easy to setup CPE-890DH operation mode, IP address, Channels by set switch on product, no need to access into GUI, avoid the complex setup program, simple to check the working status.
Power over Ethernet
CPE-890DH has integrated passive Power over Ethernet (PoE) (IEEE802.3af 48V PoE is optional), for easy installation and lower cost. So it can be installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure.
Main Features:
- Comply with IEEE 802.11ac/a/n, 5GHz,900Mbps Data Rate
- 1*10/100/1000Mbps WAN Port, 1*10/100/1000Mbps LAN Port
- 500mW high power, build in 18dBi MIMO panel antenna, stronger signal strength, more wireless coverage
- Support passive PoE 24V; 48V IEEE 802.3af PoE is optional
- Support SSID broadcasting, Muiti SSID up to 4, then support tag VLAN based on SSID.
- Support Gateway (PPPOE, static IP, dynamic IP), Wireless AP, Repeater, WISP, WDS operation mode
- With function of build in firewall, IP filter, URL filter and MAC filter
- Comply with IEEE 802.3az standard, RF power adjustment and frequency analyzer for better application in different environment
- Support DDNS, VPN pass through, Port forwarding and DMZ host
- Support 64/128-bit WEP security, 128bit WPA (TKIP/AES) security
Product Spec.:
| Hardware: | |||||
| Chipset | Qualcomm | ||||
| Standard | 802.11ac/a, MIMO technology | ||||
| Memory | 128MB DDR2 RAM | ||||
| Flash | 16MB | ||||
| Interface | 1 * 10/100/1000Mbps RJ45 WAN Port | ||||
| 1 * 10/100/1000Mbps RJ45 LAN Port | |||||
| 1 * LED display, 1 * F(Function) switch button, 1 * S(Select) button, press it to setup WDS PTP/PTMP connection | |||||
| 1 * Reset button, press 15 seconds to revert to default setting/press 1 seconds to finish the WDS PTP/PTMP connection | |||||
| Antenna | Build in 18dBi MIMO Panel Antenna | ||||
| Power consumption | 24V PoE, <15W | ||||
| ESD | ±6KV | ||||
| Surge | ±2KV | ||||
| Water Proof Level | IP65 | ||||
| Size | 315mm * 145 mm * 80mm | ||||
| RF Data | |||||
Frequency | 5GHz: 802.11a/ac | ||||
| 5GHz: Standard: 5150~5825MHz, Debug: 5020~6100MHz | |||||
| Throughput | 900Mbps | ||||
| Modulation | OFDM = BPSK,QPSK, 16-QAM, 64-QAM | ||||
| DSSS = DBPSK, DQPSK, CCK | |||||
| Receive Sensitivity& RF Power | |||||
| RF Power | 802.11a | 54M | 23±2dBm | 6M | 26±2dBm |
| 802.11n HT20 | MCS7 | 22±2dBm | MCS0 | 25±2dBm | |
| 802.11n HT40 | MCS7 | 21±2dBm | MCS0 | 24±2dBm | |
| 802.11ac HT80 | MCS9 | 20±2dBm | MCS0 | 23±2dBm | |
| Receive Sensitivity | 802.11a | 54M | -72dBm | 6M | -90dBm |
| 802.11n HT20 | MCS7 | -70dBm | MCS0 . | -88dBm | |
| 802.11n HT40 | MCS7 | -68dBm | MCS0 . | -86dBm | |
| 802.11ac HT80 | MCS9 | -58dBm | MCS0 . | -85dBm | |
| EVM | 802.11a: ≤-25 dB; 802.11n: ≤-28 dB; 802.11ac: ≤-32 dB | ||||
| Firmware Features: | |||||
| Operation mode | Wireless AP, Client | ||||
| Wireless Security | 64/128-bit WEP, WPA / WPA2, WPA-PSK/ WPA2-PSK encryption | ||||
| SSID | Multiple SSID up to 4 | ||||
| Firewall | DoS, SPI Firewall, IP Address Filter/MAC Address Filter/Domain Filter IP and MAC Address Binding | ||||
| Protocols | IPv4 | ||||
| Others: | |||||
| Package Contents | 900Mbps Dual Band wireless access point Ethernet Cable 24V PoE adapter Quick Installation Guide Setting Accessory | ||||
| System Requirements | Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, Windows 8, MAC OS, NetWare, UNIX or Linux | ||||
| Environment | Operating Temperature: -30~55 ºC Storage Temperature: -40~70 ºC Humidity: 5%~95% non-condensing | ||||
| Management | Firmware GUI ,Remote Management, WLAN Controller, Cloud Management System | ||||